Project Detail

Pic Basic Delay Program

Pic Basic Delay Program is project number 336292
posted at Freelancer.com. Click here to post your own project.

| More

Status: Cancelled

Selected Providers: -

Budget: $30-250

Created: 10/30/2008 at 1:48 EDT

Bid Count: 7

Average Bid:
$ 116

11/29/2008 at 1:48 EST

Project Creator: theflop
Employer Rating: (No Feedback Yet)

Description

I am looking for a programmer that can program PIC Microchips in BASIC with a highly accurate and repeatable delay function with a range from tens of microseconds to full seconds in 6 different ranges. A "HI" input will trigger the delay output. The output time delay range will be selectable thru a menu system via input buttons and shown on an LCD. The input buttons include UP-DOWN-LEFT-RIGHT, ENTER, FWD and BACK. The buttons may be changed as long as they make sense to the user. The standard output will be a single 10ms pulse and the LCD should indicate a trigger event. Also, the output pulse width (PW) should be changeable via the menu system.
When this project is completed a second project will be needed along the same line. What is important here is the menu system. It must be user friendly and intuitive. The menu must show a welcome screen, a menu opening page, an easy-to-navigate input interface and an ability to set the output PW.
The chip must also have the ability for a READY output and an INHIBIT input. The LCD will be a 2x20 parallel LCD (non-serial).
The input buttons must be de-bounced via software. I will do all of the physical electronics for the job. The output delay timing will be measured with an oscilloscope for accuracy and repeatability. The program must be written in a PIC BASIC language so I may upgrade it at a later date.
Further details may be conveyed at a later time as the project develops.

Report Violation

Job Type

See more: electronics, include, language, long, make, menu, pic, program, programmer, project, system

Messages Posted:0

If you are the project creator or one of the bidders Log In for more options

PMB

100

10 days

10-30-2008 02:06 EDT

(No Feedback Yet)

hi. please see pm

jerson

150

15 days

10-30-2008 09:58 EDT

(No Feedback Yet)

I am an embedded systems designer and work with PIC basic Pro. I've done a lot of small and big sized projects using PBP and some in C. I've done a blind industrial timer similar to this in C. It had 3 ranges going from seconds to hours. I've done many projects with LCD and menuing systems and I know I can deliver. You might like to see my profile to see my work. Of course it is not very elaborate, but my homepage has much more information. I am an active member of the PicBasicPro forum too. My bid is for electronic design transfer and does not include prototype build and shipping costs. Electronic design transfer means, I will create the schema, code the PIC, send you the schema, hex file so you can check if all matches up. When you're ok, you complete the payment and I send you the deliverables. Jerson

unleased2612

120

10 days

10-31-2008 05:40 EDT

(No Feedback Yet)

We're capable of doing the task completely on c based compiler. If it suits you please let me know.

danishmemon35

110

15 days

11-11-2008 23:16 EST

(No Feedback Yet)

plz consider my bid i will provide you the appropriate and exact solution with your required delay, if u r interested than u consider my bid and than i will brief you on your project construction and programming

jgiraldol

135

10 days

11-11-2008 15:49 EST

(No Feedback Yet)

I am an expertize in assembler programing. Professor for applied digital design. I manage with Pic and 8051 derivatives.

zenecis

20 days

11-15-2008 01:42 EST

(No Feedback Yet)

Dear Sir/Madam, We are an embedded systems service provider based out of India (New Delhi) and have a good experience in PIC mikroBasic. We would need more information on the hardware for the project implementation. We are a privately registered company run by freelancers. Please provide us a chance to discuss with you more about the project. Thanks and Regards, Mayank Agrawal

sapthagiri1982

120

12 days

11-24-2008 04:42 EST

(No Feedback Yet)

hi contact me for this project

Bid on this Project

WHAT IS FREELANCER.COM?

Freelancer.com is a global outsourcing solution and freelance jobs website. Here you can find freelance coders, writers, programmers, designers, marketers and more. You can also outsource projects and save a lot of money in the process. Getting the best web design, professional programming, custom writing or affordable marketing has never been easier!

We have thousands of satisfied clients from every corner of the world. Would you like to outsource your next project? Would you like to find freelance jobs and make money online? Just sign up to get started! Outsourcing jobs is the process of hiring an outside company or individual to complete your projects. We have created a safe environment for both service buyers and service providers via our secure payment system. You outsource the project and don't release any money until you're satisfied! Try outsourcing for free today! Don't forget to bookmark our homepage for your next project or job.