Project Detail

Please check PM. Thanks:)

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Please check PMB.:)

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

we have the expertise to do this. pl see pm for further details.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hi, Pelase see pmb for detail, Best regards

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Sir, PLease see my pm. Regards Shabbir

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hi I am intrested in your project. Thanks.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Dear Sir Please check pm for details.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Please, check PM for details!

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hi, we will be glad to have an opportunity to work on thins project. Please visit our web site: www.bodesign3d.com. We have four years experience in 3d technical modeling. We are also industrial design studio. Best Regrads, Jakub Piasecki

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hello, We have gone thoroughly your requirement and understood it as we have good expertise. Please check your PMB for our portfolio and other details. Thanks. Regards, "Mayur Dayama"

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Experience in 3D SOLIDWORKS DESIGN more than 7yrs. Able to create 3D MODEL & Detail MODEL & Detail technical drawing as per request. Experience in DESIGN & DRAFTING in OIL & GAS INDUSTRY,AUTOMOTIVE,SPECIAL PURPOSE MACHINE,CONSUMER PRODUCT, AUTOMATION & ELECTRONIC INDUSTRY.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hi, I am interested in this project. Please check PM for more details. Thanks, -Saro

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I am very interested in working with you on this project. . To that end you will find me very responsive despite being in the UK I do make the effort to stay in touch as regularly as is required, either via msn or Skype or telephone which ever suits you best. From my profile you will see that I have experience in plastic injection moulding. The company I currently work full time for (I freelance in my own time FOR NOW) are injection moulders. Please take the time to visit my external site cwcad.co.uk I have placed a bid of $250.00 but would like to agree an hourly rate of $25.00 and agree not to exceeed your maximum budget that we will agree at the outset. This way you have the peace of mind of a maximum cost and usually I can come in under what is agreed. I have a good knowledge of plastics an what they can and cannot cope with. Further I will be able to help you to avoid some of the pitfalls of working with plastics such as designing products that are unmouldable. I am also able to give you contact information for a host of mould tool produces in China from my contacts list or indeed arrange quotions if that is of any interest. I will provide a fully dimensioned engineering drawing that your toolmaker will have no trouble producing from. I am also able to offer solid works 3D cad models and they will be convertible into many formats. I am able to provide drawings via self executable files that you will be able to revolve and view from all angles to ensure that the design meets with your exact needs. Look forward to hearing form you soon. Regards Chris

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

i have about 20 years of experience doing such projects, CAD and 3D is my field of expertise, i have all the the software and hardware for doing this job, made thousands of drawings, in the catagories of architectural, civil, electrical, meachanincal, etc. with the help of manual sketches provided by engineers, verbal discussion, and with help of raster images, so converting manual drawings, blue prints raster images to 2d, and then this 2d to 3d is my expertise, so made hundreds of 3d modelling, houses, building, different equpiments, etc. you can see some of my work on http://www.powermedia19.com/3dSimulations.htm http://www.powermedia19.com/3dAnimation.htm http://www.powermedia19.com/architecturalWalkthroughs.htm http://www.aniboom.com/Player.aspx?v=914 this is website of the company for whom i am working right now as 3d Artist,, and on this site all the 3d related work and CAD related work is mine, NOTE:well this website is just to show you some of my work, there is no relations of my this query to this company as i am looking for freelance work my most recent project was animation for the simulation of how electricity is produces thru hydal power, it is about 15 minutes animation how the dam is build, how the reservoir an the power house , weir etc, if you need i will send you some the clips of this animation too, as the client did not allowed me to put this work on any where ok hope to hear from you favourable response PS. well i have done a project for a US company where i created about 300 models for them they just sent me the drawings of 3 sides, front, top and one side, some times they will send me the pictures too, and it was so precise, only 0.2 mm tolerance, and i made all these 300 models in SolidWork, i do modeling in AutoCAD, 3d Max, SolidWork, i have done furniture 3d modelling and i designed my computer table, cupboard myself, so a bit knowledge of designing too well since 1992 here in my country i am worked on different projects with foreign consultants, so my English is good well i have dual cure computer at home, wireless internet connection, i can be online in msn, yahoo, gmail chat

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hi , we can do it pls see PMB. Regards, Enggservices

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

im well experienced in civil and architectural drawings and i can also do this type of drawings.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

actually we can fix it up your cad more early, its depend on your cad model.. lets make it true..;-)

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

i have done my most of work in catia v5 r18 software..i am an aerospace engineer..so i have experiance in aircraft manufacturing work in polymer.if you like then contact me.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hello West, I am located 30 minutes from Detroit, Michigan and have been working in the plastics and molding industry since the mid '80s. I have been a freelance designer since 1996 and currently design and model using Solidworks or Rhinoceros. I can provide many samples of my work. Thank you for the opportunity.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Dear Sir, I am using Solidworks, Pro/E , UG NX6 and Autocad to make mechanical design and plastic mold design. Please let me know if you are interested at rpaynandosatyahoodotcom

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

see PM for detailed bid. thank you................

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

OK lest talk about it, I can give you the best price, check out your PM. you can reach me over skype "jose.a.cortes"

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

We are a group of mechanical engineers based in Cebu City engaged in the business of creating high quality and cost effective CAD solutions and other product design services. Our engineers have years of solid hands on experience gained from multinational companies involved in the development and manufacture of industrial, commercial, automotive and consumer products. Bringing your ideas to life is what we do best

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

i have total 10 years exp, in cad & 3d

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I am a Product Design Engineer by experienced (CATIA V4/V5, Rhino, Solidworks) primarily working with automotive seating & interior system with parts such as door trims, headliner, flooring and insulation components, complete seat package, configurable consoles, overhead consoles, and glass modules with Hyundai & Chrysler most of the time and plastic parts primarily thru injection molding. Created studies/research/benchmark and reverse engineered product (interiors and seating system components) against other OEM on same platform. Assesses costs, product concepts, strengths and weaknesses of alternative designs and design trade-offs, by obtaining, stripping down and analyzing other products, identify performance gaps, thus develop better results, more robust design concept, process improvement and achieve improved innovation without compromising safety, standards, function, performance and comforts. Let me know should you need more info and I have offshore resources should you have huge and long term projects.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Edward M Barnes usa November 11, 2008 San Francisco To Whom It May Concern: I read interest your position announcement-seeking candidates for the position of CAD Design Services For Plastic Products and wish to be considered a candidate for this position. The responsibilities of the position are very appealing to me because I seek a position where I can both contribute to mechanical drafting and design and grow in my chosen profession During the past six years I have work as a product and design draftsman for different company as contracts. My experiences include, but are not limited to, AutoCAD, ProE, and Solidworks. A majority of my drafting duties included the reworking of designs to update them to current standards. I am confident that my skills would be a benefit to your company. The enclosed resume will describe my qualification for the position advertised. I would appreciate the opportunity to discuss this position with you at your convenience, as it sound like an exciting opportunity for us. Sincerely, Edward M. Barnes

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hi...Please check PM

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hi .Please check PM.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

please read pm

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hello, PLS see PM. Good knowledge in plastic material, and experienced in part design, 3D/2D drawing.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hello, I am interested. I am looking forward to collaborating.http://weblancer.net/users/Lavender/portfolio/

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I a mechanical engineer with 8 years of experience in new product development. I have good quality CAD skills in ProEngineer, ProMechanica, SolidWorks, and AutoCAD.I will review your design specifications, draft model in 3D, 2D and also FEA anlysis if necessary in order to make recommendations to establish the best and cost effected product to you.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

We are CAD/CAM/CAE solutions provider, we have domain expertise in automotive , plastic appliance, sheet metal, heavy engineering and special purpose machines. We have techies who can handle product design, Design validation, design optimisation and FEA specialists. Visit us at http://concadd.weebly.com

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hi, We would like to take up this job....Please give us this chance... Thanks Amit

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

we are experts in autocad software development and we have a team of 18 autocad designers dedicated 24 hours for industrial drawing in india.give us a chance and become our friend forever.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I'm new here but have a lot experience in mechanical design. I've been working as Mechanical Design Engineer for 10 years, designing all mechanical parts of Television which most of all were made from plastic: PS, ABS & PP I will make 3D drawing first then 2D, using ProEngineer Wildfire 2,3 or 4 depend on your request.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Please check PM for our work samples

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

We have the capabilities to do this job. So go thru the details and let us work for you.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I'm a design engineer with 3 years experience in plastic field. As software I work with Catia V5. Right now I'm working for cars interior design projects so I have a lot to do with plastic engineering. If you need examples of my work please contact me on my I.M. : marius.ilie I hope my experience in this field will be decisive factor for you.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

For my work evaluation see the following link httP://www.geocities.com/zersa_18. i have 4 years esperience of doing cad for plastic products. Bid is negotiable.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hello Please see my PMB

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

hi, we can design plastic parts and plastic injection moulds with detailed drawings. We also generate NC codes. Please visit our web site adsengineering.co.cc for further details. The quote is only budgetary assuming a simple design for a mould. For details please mail us on Regards,

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I am a design engineer (mechanical) for home appliance porducts. more than 10 years experience with AutoCAD,Pro/Engineering.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

i have 4 years of exp in plastic design and modeling using cad softwares. cant me.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

We are a group of 3 mechanical engineers based in Bosnia and Hercegovina.Our experience in 3D design (topsolid) and design for plastics inection tools more than 8yrs. Please, check PM or mail for details!

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Details will be informed after receiving Work order or Project detail

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Please visit our website www.shapingideas.com

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Can negotiate after more details.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hello, I would like to make a bid for your project. I am an experienced draftsman and autocad operator. Recently the company I worked for, was affected by the global financial crisis, it had to shutdown and now its future is uncertain. So I want to take this opportunity not only to earn but to share my expertise as well. I hope you will give me the chance. Thank you.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

im experience of 2d and 3d cad,3d max for 8 years. im designer for small item accessories.design small fitting hardware for furniture. im interested to business with you. you can send me mail for me at dumente at gmail dot com.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hi, I am interested in this project.I have Experience in 3D DESIGN model for plastic injection molding more than 10yrs. Check PM for more details!

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

RAMESH.M, No: 565, Madhusudhanan Nagar, Cvil Aero dram Post, Chitra, Coimbatore-14 ,Tamilnadu,India +91-9994142918 JOB OBJECTIVE: Seeking Executive assignments in the area of process engineering/methods/product establishment & new product development . Key Areas of Exposure Ø Project Management : § Engineering New Projects Responsible for evaluation & implementation of manufacturing Design of fixture, trial & proof out of new tools & machinery, process planning and commencing production. SOFTWARE SKILLS : § AutoCAD 2004. § CATIA V5 R16, § MS-OFFICE. INDUSTRIAL EXPERIENCE-5+YEARS IN DESIGN &DEVELOPMENT ACADEMIC QUALIFICATION: Under Graduation : Bachelor of Engineering (Mechanical Engineering). Percentage : 71% Institute : Erode Sengunthar Engineering College.(Bharathiar University) Year of Completion : April 2002 Technical Qualification :Diploma in Mechanical Engineering. Percentage :79.8% Institute : Kongu Polytechnic. Year of Completion : April 1998 PERSONAL PROFILE : Father's Name : S.V.Muthusamy Father's Occupation : Former Date of Birth : 15/07/1998 Marital Status : Married. Nationality : Indian. Permanent Address : No: 86,Sillan Kadu,Siluvam Palayam, Vazhai thottam(po),Sivagiri(via), Erode-638109. Language Known : Tamil, English. Passport No. : E9172791 Driving Licence No. : F/TN/33/002386/200

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

This is a MetaData/Organic modeling problem. The ideal mesh is where the data structure/model is a near-perfect behavioral (fluidic polymer) mirror of subject. I am a member of the ACS-American Chemical Society,on-line#:30017307. My 3D-portfolio is in a downloadable self-extracting zip at: "http://seahawk1.elance.com > portfolio > 3D portfolio.zip" I await you review and consideration. Thank You.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

HI. PLEASE SEE MY PMB.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

HELLO SIR, I AM HAVING EXPERIENCE IN DESIGNING AND I HAVE WORKED AS TOOL DESIGNER FOR PLASTIC COMPONENTS

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hi, I am very interested in your offer and would provide you with good service. Although I am new to GetAFreeLancer, I have extensive experience in this field. Please provide the details of your exact requirements.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Please check your PMB.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

i have lot of experience regarding the 3-D Modeling work with CATIA and i am a expert of AutoCAD design. If i have any kind of sample design i can make it 2-D or 3-D model.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Great design skills///

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

HI I am Sachin Kumar. As acording to the project requirement that needs good back groung in the field of plastic. I am post diploma guy from CIPET that is Central Institute Of Plastic Engineering And Technology. Frm which i did 4 year course of Plastic mould design which include each every thing related to the plastic. For the experiance part of thing i am running a organisation that is YOMEN TECHNOLOGIES in HYDERABAD INDIA. We are having all the stuff guyes with us we can deliver the project very easy on the time. So faith on us give once the project. for calrification on our expertise i am attaching some file in 3D.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Experience in 3D SOLIDWORKS DESIGN more than 7yrs. Able to create 3D MODEL & Detail MODEL & Detail technical drawing as per request. Experience in DESIGN & DRAFTING AUTOMOTIVE,,CONSUMER PRODUCT, AUTOMATION & ELECTRONIC INDUSTRY

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Dear sir, We are interested in your projects & we are looking for long term relationship with you so that we can utilise our skill to provide you best services. dinesh kachare

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid