Project Detail

Description

The project is to design a PCB based on the OLIMEX development kit http://www.olimex.com/dev/index.html. All the current devices on the board will be used in the new board.

The board will use a AT91SAM9260B-CU, BGA processor instead of AT91SAM9260 QU.
The SDRAM would be the MT48LC16M16A2P-6A:D (256 mega) or the currently in the kit.
The FLASH would be the AT45DB321D-SU or the currently used in the kit.
All the headers (40 pin extension, JTAG, SPI, I2C ) would be the same.
The board will have the dimension, holes and a smartcard conector like our current board. We will send the Orchard files to the designer.
The board should use baterries for at least 8 hours that would be charged via USB or an external single power supply: 5V.
The board will have a accelerometer (see on the Olimex site. They have a extendion board that has one).
The target cost of the board is US$ 50,00. we will give a bonus for reaching this target. We will also double the bonus for each US$ 10,00 you may get off the board cost.
If the board runs with no revision I will also give you a bonus.

The deliverables are :

Orchard files
Gerber files
Altium files

We will escrow 30% on the acceptance of the bid, 20% on the deliverable of the Gerber file for production, 50% after test.