Project Detail

Module Test System  

Module Test System is project number 97966
posted at Freelancer.com. Click here to post your own project.

 

| More Free Trial For New Buyers
 

Status:

Selected Providers: tasoft

Budget: $300-1500

Created: 10/15/2006 at 22:28 EDT

Bid Count: 15

Average Bid:
N/A

11/14/2006 at 22:28 EST

Project Creator: nixeco
Employer Rating: 10/1010/1010/1010/1010/1010/1010/1010/1010/1010/10 (2 reviews)

Bid On This Project
 

Description

Develop some basic serial communications functions to test an outboard device using Borland C++ Builder 6.
The first phase involves a 4800 baud 8 bit even parity polled network environment.
The goal is to test the device(s) that will be used in this network.
There are 128 devices max, with 16 i/o lines on each.
A simple screen on 16 button/lights plus address contol dialog would produce 2 byte commands and interpret 2 byte responses.

After successful demonstration of this, phase 2 would add data aquisition to the system, using NI.com hardware and c++ software development module etc.
The goal would be to measure outputs of the i/o lines and reduce data first to average and peak values for a time window, and then to reduce further to pass fail results for test operator use.

This project, generally would be done somewhat itteratively, passing sources back ad forth etc.

Messages Posted:0 View project clarification board Post message on project clarification board

Bid On This Project
 

If you are the project creator or one of the bidders Log In for more options

Bids are hidden by the project creator. Log in as the project creator or as one of the bidders to view bids. You will not be able to bid on this project if you are not qualified in one of the job categories. To see your qualifications click here.


    Bid on this Project