Project Detail

I can do it.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Please check the PMB

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Further details are required but I'd love to apply my excellent skills to this project

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

HI, We are ready to provide the project mentioned by you. Our terms & condition mentioned below. Expecting positive reply from you as soon as possible. Duration: 15 days. Chip: Any PIC microcontroller series. Charge:$223

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

$170 and completed with in 45 days

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Bidder Comments : Dear Sir, Kindly refer to your PM for more details. Thanks & Regards, SANDS Team.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hello sir, I am looking forward to this assignment.I will provide excellent quality as I have exp in this field. Please refer PMB for details.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hello Sir, I am very experienced with PIC uC's, especially 16F, thank you.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Please check the PMB

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

HI, I have experience working with pic microcontroller an I also use Hi-tech to programe them. lets start working!. regards.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I have done this kind of project before i will give you code and schematics on time

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hello, I can do this. See PM for details.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hi, I believe I can meet your needs. Regards

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I am an embedded system designer; I worked on the Hi tech compiler before. Any question do not hesitate to contact me

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Dear we are already performing projects on temperature control on ATMEL microcontroller in C language.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

We are group of young embedded engineers, formed as group and providing outstanding solutions in embedded field. for your reff you can visit www.embeddedsystems.webnode.com

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I think, I can deliver the code for your project in C

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I am having experience of 2.2 years in Embedded systems.I have worked on 8051,AVR and MSP430 microcontroller,communication protocols.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hello spider7 I have worked on a PID controller for an industrial furnace. I can create the controller PCB and Micro-C code for making it work. Kind regards....

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Please Check PMB

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hi, I have 7 years experince in developing automotive applications using langague. I worked with different microcontrollers (8-bit, 16-bit and 32-bit micro-controllers). I can deliver your software, the schematic, and the PCB implementation. Further information are needed. Thanks

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hello, I have done similar project in rentacoder site, thanks Prasad

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I am Embedded system Engineer M.Tech(embeded Systems). I worked with the same project Microchip's PIC family controller- PIC16F876A etc. The S/W was in C by MPLab IDE. I need the Circuit diagram then I can develop the software for U. Thankx & Hv a nice day !

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

sir please check your pmb

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

hello, I have done lot of projects with PID algorithm. Please give me more details about your requirement.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

We have the PID code for Atmel AVr and PIC. along with the hadrware Schematics Let me know what you what. More details in PM

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Please check your inobx immediately.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

hi we are expertize in this field we had all qualities which you want for you company waiting to accept my bid,

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Please see Your PMB for details.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Spider7, I am also looking for an autotuning PID or fuzzy logic control software. I use the CCS C compiler for my PIC18F series micro. Having extensively researched PID and to a lesser extent autotuning, the solution is difficult without knowing the process parameters. If you find a good solution, I am prepared to pay for 50% of your cost of this freelance work. The autotuning is the difficult part, not the PID loops email is username axtxhxoxtxmxaxixlxdxoxtxcxoxm Mike

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I need some information about the procees you need to control.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

hi, we have all that requirement which u need for you project lets, communicate

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

WE ARE A GROUP OF PEOPLE WHO HAVE EXCELLENT KNOWLEDGE AND WORK EXPERIENCE IN CODING AS WELL AS MICRO-CONTROLLER. WE GUARANTEE WORK ON TIME. IF INTERESTED PLEASE LET US KNOW AS SOON AS POSSIBLE. THANKS

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I just finished sailing across the Pacific and am free to work from New Zealand high speed internet starting immediately. My normal rate is $30/hr, but I will be happy to for work $15/hr or less. I can bill you for hours worked or you can just take the $200 bid. Either way the maximum I will charge is $200 for gerbers. If you want a finished, tested product I can do that, too, for a little more. I did a PID with an FPGA, DSP, micontroller combo for an advanced navy helicopter mini laser pointer last year. I should be able to get this done pretty quickly. To properly simulate this you will need the MATLAB plug in. I have MATLAB, but not the plug in. I also did some gyroscope temperature, shock and vibe cal for the same project listed above. Please see my profile for a copy of my resume. I can start immediately. Please email me if you would like more info or have any questions. Thanks for your consideration.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Hi i am very interested to do this project and i will assure u i can deliver the project at on time with good quality

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I CAN DO THIS WITH THE SPEC,ONCE YOU APPROVE THE PRODUCT THEN PROCEED TO PAYMENT.... Thanks & regards Rythnace (+60169641020)

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I have vast experience in the PIC uC 16F, 18F series and hitech C compiler. So I can deliver this project in the quoted time.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

1) Component Selection & Circuit design 2) Schematic Capture in CADSTAR 10.0 3) Coding in C 4) Testing

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

I have a earlier exp i this type projects.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

See details in MB.

-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid